|
| |
|
Adaptec
Serial ATA Controllers |
-
Choose an
Adaptec Unified Serial™ controller to leverage cost-effective,
high-capacity Serial ATA (SATA) disk drives or high-performance
Serial Attached SCSI (SAS) drives, or both, in a single storage
system. With Adaptec Unified Serial controllers, you can scale
up to 60TB (using 500GB drives) and increase performance for
SATA and SAS storage.
|
|
Adaptec RAID 31605
is a 16-port controller that
supports SATA and SAS drives and next-generation PCIe connectivity. It
features Adaptec RAID Code (ARC) with RAID levels 0, 1, 1E, 5, 5EE, 6, 10,
50, 60, JBOD, as well as Copyback Hot Spare and optional Snapshot Backup.
Part Number: 2252700-R
Adaptec PCIe SATA and SAS RAID Controller Family Datasheet |
 |
16 ports support up to 16 SATA and SAS
drives |
|
|
PCIe host interface |
|
|
3 Gb/s per port |
|
|
RAID levels 0, 1,1E, 5, 5EE, 6, 10, 50,
60, JBOD |
|
|
Copyback Hot Spare and optional Snapshot
Backup |
|
|
LED header for drive activity and
failure indication |
|
|
SES2 and SGPIO enclosure management
|
|
|
256MB DDR2 fixed data cache |
|
|
RoHS compliant |
|
|
Optional battery backup module |
|
|
Adaptec RAID 31205
is a 12-port controller
that supports SATA and SAS drives and next-generation PCIe connectivity. It
features Adaptec RAID Code (ARC) with RAID levels 0, 1, 1E, 5, 5EE, 6, 10,
50, 60, JBOD, as well as Copyback Hot Spare and optional Snapshot Backup.
Part Number: 2252400-R |
|
|
12 ports support up to 12 SATA and SAS
drives |
|
|
PCIe host interface |
|
|
3 Gb/s per port |
|
|
RAID levels 0, 1,1E, 5, 5EE, 6, 10, 50,
60, JBOD |
|
|
Copyback Hot Spare and optional Snapshot
Backup |
|
|
LED header for drive activity and
failure indication |
|
|
SES2 and SGPIO enclosure management
|
|
|
256MB DDR2 fixed data cache |
|
|
RoHS compliant |
|
|
Optional battery backup module |
|
|
Adaptec RAID 3085
is an 8-port controller
that supports externally attached SATA and SAS drives and supports the
next-generation PCIe connectivity. It features Adaptec RAID Code (ARC) with
RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50, 60, JBOD, as well as Copyback Hot
Spare and optional Snapshot Backup. With an MD2 low-profile form factor,
this card will fit into any server, including high-density rack mount and
blade servers.
Part Number: 2251600-R |
|
|
8 ports support up to up to 60TB of
externally attached storage (using 500GB drives) |
|
|
PCIe host interface |
|
|
3 Gb/s per port |
|
|
RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50,
60, JBOD |
|
|
Copyback Hot Spare and optional Snapshot
Backup |
|
|
LED header for drive activity and
failure indication |
|
|
SES2 and SGPIO enclosure management
|
|
|
256MB DDR2 fixed data cache |
|
|
MD2 low-profile form factor |
|
|
RoHS compliant |
|
|
Optional battery backup module
|
|
|
Adaptec Serial Attached SCSI RAID 4805SAS
Adaptec Serial Attached
SCSI RAID 4805SAS PCI Express card is an eight-port controller that supports
SAS, SATA or SATA II disk drives. It features the Adaptec RAID Code (ARC)
with standard RAID 0, 1, 5, 10, 50, JBOD as well as the Adaptec Advanced
Data Protection Suite with RAID 1E, 5EE, 6, 60, Copyback Hot Spare and
optional Snapshot Backup. The card has 128 MB of ECC-protected DDR DRAM and
a battery unit is optional.
Part Number: 2183300-R |
|
|
Eight ports support up to eight SAS,
SATA and SATA II drives |
|
|
128MB ECC-protected DDR2 memory
|
|
|
Standard Features: RAID 0, 1, 10, 5, 50,
JBOD, hot swap, hot spares, Online Capacity Expansion, RAID Level
Migration, Optimized Disk Utilization and the following Adaptec
Advanced Data Protection Suite features: RAID 1E, 5EE, 6, 60 and
Copyback Hot Spare |
|
|
Optional Feature: Snapshot Backup
|
|
|
3/4-length PCI form factor |
|
|
Optional battery backup module |
|
|
Adaptec Serial Attached SCSI RAID 4805SAS
Adaptec Serial Attached
SCSI RAID 4805SAS PCI Express card is an eight-port controller that supports
SAS, SATA or SATA II disk drives. It features the Adaptec RAID Code (ARC)
with standard RAID 0, 1, 5, 10, 50, JBOD as well as the Adaptec Advanced
Data Protection Suite with RAID 1E, 5EE, 6, 60, Copyback Hot Spare and
optional Snapshot Backup. The card has 128 MB of ECC-protected DDR DRAM and
a battery unit is optional.
Part Number: 2183300-R |
|
|
Eight ports support up to eight SAS,
SATA and SATA II drives |
|
|
128MB ECC-protected DDR2 memory
|
|
|
Standard Features: RAID 0, 1, 10, 5, 50,
JBOD, hot swap, hot spares, Online Capacity Expansion, RAID Level
Migration, Optimized Disk Utilization and the following Adaptec
Advanced Data Protection Suite features: RAID 1E, 5EE, 6, 60 and
Copyback Hot Spare |
|
|
Optional Feature: Snapshot Backup
|
|
|
3/4-length PCI form factor |
|
|
Optional battery backup module |
|
|
Compare Adaptec 31605, 31205, 3085, 4805SAS Controllers |
|
Adaptec RAID 3805
is an 8-port controller
that supports SATA and SAS drives and next-generation PCIe connectivity. It
features Adaptec RAID Code (ARC) with RAID levels 0, 1, 1E, 5, 5EE, 6, 10,
50, 60, JBOD, as well as Copyback Hot Spare and optional Snapshot Backup.
With an MD2 low-profile form factor, this card will fit into any server,
including high-density rack mount and blade servers.
Part Number: 2252100-R |
|
|
8 ports support up to 8 SATA and SAS
drives |
|
|
PCIe host interface |
|
|
3 Gb/s per port |
|
|
RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50,
60, JBOD |
|
|
Copyback Hot Spare and optional Snapshot
Backup |
|
|
LED header for drive activity and
failure indication |
|
|
SES2 and SGPIO enclosure management
|
|
|
128MB DDR2 fixed data cache |
|
|
MD2 low-profile form factor |
|
|
RoHS compliant |
|
|
Optional battery backup module
|
|
|
Adaptec RAID 3405
is a 4-port controller that
supports SATA and SAS drives and next-generation PCIe connectivity. It
features Adaptec RAID Code (ARC) with RAID levels 0, 1, 1E, 5, 5EE, 6, 10,
50, 60, JBOD, as well as Copyback Hot Spare and Optional Snapshot Backup.
With an MD2 low-profile form factor, this card will fit into any server,
including high-density rack mount and blade servers.
Part Number: 2251800-R |
|
|
4 ports support up to 4 SATA and SAS
drives |
|
|
PCIe host interface |
|
|
3 Gb/s per port |
|
|
RAID levels 0, 1, 1E, 5, 5EE, 6, 10, 50,
60, JBOD |
|
|
Copyback Hot Spare and optional Snapshot
Backup |
|
|
LED header for drive activity and
failure indication |
|
|
SES2 and SGPIO enclosure management
|
|
|
128MB DDR2 fixed data cache |
|
|
MD2 low-profile form factor |
|
|
RoHS compliant |
|
|
Optional battery backup module
|
|
|
Adaptec RAID 4000
takes advantage of the
system motherboard's existing SAS I/O ports by using complementary logic
designed on the motherboard. This innovative approach eliminates the need
for a SAS I/O chip on the card, reducing its cost. The Adaptec 4000 ZCR card
offers high-speed throughput, scalability, space-saving features, and a
cost-effective upgrade path to a full-featured hardware RAID solution.
Part Number: 2246200-R |
|
|
400 MHz IOP Performance |
|
|
Full-featured hardware RAID |
|
|
Unique form factor ideal for
high-density server environments |
|
|
Adds advanced RAID functionality to
onboard Adaptec SAS |
|
|
Consumes far less power than comparable
four and eight port RAID cards |
|
|
Supports RAID levels 0, 1, 10, 5, 50,
and JBOD |
|
|
Includes Adaptec Advanced Data
Protection Suite: RAID 1E, 5EE, 6, 60, Copyback Hot Spare, optional
Snapshot Backup |
|
|
Simplifies array management with
easy-to-use Adaptec Storage Manager™ software (ASM) |
|
|
Intel EM64-T and AMD-64 ready
|
|
|
RoHS compliant |
|
|
Adaptec Serial ATA RAID 2025SA
takes advantage of the
system motherboard's existing Serial ATA I/O channels by using complimentary
logic designed on the motherboard. This innovative approach reduces the cost
of the RAID card by eliminating the need for a SATA I/O chip on the RAID
card. The Adaptec 2025SA SATA ZCR card offers high-speed throughput,
scalability, space-saving features, and a cost-effective upgrade path to a
full-featured hardware RAID solution.
Part Number: 2113600-R |
|
|
400 MHz IOP Performance |
|
|
Full featured hardware RAID |
|
|
Unique form factors ideal for
high-density server environments |
|
|
Adds advanced RAID functionality to
onboard Adaptec SATA |
|
|
Consumes considerably less power than
comparable four and eight port RAID cards |
|
|
Supports RAID levels 0, 1, 10, 5, 50,
and JBOD |
|
|
Simplifies array management with
easy-to-use Adaptec Storage Manager software (ASM) |
|
|
Intel EM64-T and AMD-64 ready |
|
|
Adaptec Serial ATA II RAID 2420SA
is a four-port controller
that supports SATA or SATA II direct attached disk drives. It features the
Adaptec AIC-8210 SATA RAID-on-Chip (ROC) ASIC and Adaptec RAID Code (ARC)
with standard RAID 0, 1, 5, 10 and JBOD as well as the Adaptec Advanced Data
Protection Suite with RAID 1E, 5EE, 6, Copyback Hot Spare and optional
Snapshot Backup. With the industry's most advanced feature set, the Adaptec
2420SA provides the highest level of data protection.
Part Number: 2169300-R |
|
|
Four ports support up to four Serial ATA
and Serial ATA II drives |
|
|
PCI-X 64-bit//133 MHz host interface
(3.3 volts only) |
|
|
Standard Features: RAID 0, 1, 5, 10, and
JBOD, hot swap, hot spares, Online Capacity Expansion, RAID Level
Migration, Optimized Disk Utilization and the Adaptec Advanced Data
Protection Suite with RAID 1E, 5EE, 6, and Copyback Hot Spare
|
|
|
Optional Feature: Snapshot Backup
|
|
|
RoHS compliant |
|
|
Half-size PCI form factor |
|
|
Optional battery backup module |
|
|
Adaptec Serial ATA II RAID 2820SA
is an eight-port controller
that supports SATA or SATA II direct attached disk drives. It features the
Adaptec AIC-8210 SATA RAID-on-Chip (ROC) ASIC and Adaptec RAID Code (ARC)
with standard RAID 0, 1, 5, 10, 50, and JBOD, as well as the Adaptec
Advanced Data Protection Suite with RAID 1E, 5EE, 6, 60, Copyback Hot Spare
and optional Snapshot Backup. With the industry's most advanced feature set,
the Adaptec 2820SA provides the highest level of data protection.
Part Number: 2169900-R |
|
|
Eight ports support up to eight Serial
ATA and Serial ATA II drives |
|
|
PCI-X 64-bit/133 MHz host interface (3.3
volts only) |
|
|
Standard Features: RAID 0, 1, 10, 5, 50,
and JBOD, hot swap, hot spares, Online Capacity Expansion, RAID
Level Migration, Optimized Disk Utilization and the Adaptec Advanced
Data Protection Suite with RAID 1E, 5EE, 6, 60 and Copyback Hot
Spare |
|
|
Optional Feature: Snapshot Backup
|
|
|
Half-size PCI form factor |
|
|
RoHS compliant |
|
|
Optional battery backup module |
|
|
Adaptec Serial ATA RAID 2020SA
takes advantage of the
system motherboard's existing Serial ATA I/O channels by using complimentary
logic designed on the motherboard. This innovative approach reduces the cost
of the RAID card by eliminating the need for a SATA I/O chip on the RAID
card. The Adaptec 2020SA SATA ZCR card offers high-speed throughput,
scalability, space-saving features, and a cost-effective upgrade path to a
full-featured hardware RAID solution.
Part Number: 2113400-R |
|
|
400 MHz IOP Performance |
|
|
Full featured hardware RAID |
|
|
Unique form factors ideal for
high-density server environments |
|
|
Adds advanced RAID functionality to
onboard Adaptec SATA |
|
|
Consumes considerably less power than
comparable four and eight port RAID cards |
|
|
Supports RAID levels 0, 1, 10, 5, 50,
and JBOD |
|
|
Simplifies array management with
easy-to-use Adaptec Storage Manager software (ASM) |
|
|
Intel EM64-T and AMD-64 ready
|
|
|
RoHS compliant |
|
|
Compare the
above 3805, 3405, 4000, 2025SA, 2420SA, 2820SA, 2020SA controllers
|
|
Adaptec Serial Attached SCSI 58300
is an eight-port
controller with two x4 external SFF-8088 mini SAS connectors featuring
Adaptec HostRAID - an integrated RAID technology that maximizes system
performance and uptime. The Adaptec 58300 supports up to eight
direct-attached drives and up to 128 devices using expander technology. The
card offers RAID levels 0, 1, 10 and JBOD as well as 48-bit LBA support for
the use of disk drives exceeding 137GB in capacity.
Part Number: 2220600-R |
|
|
Eight 3 Gbs SAS ports |
|
|
Supports both Serial Attached SCSI and
Serial ATA hard disk drives |
|
|
PCI-X 64 bit/133MHz host interface
|
|
|
RAID 0, 1, 10 and JBOD |
|
|
48-bit LBA support |
|
|
Low-profile form factor |
|
|
Bootable array support |
|
|
RoHS compliant |
|
|
Adaptec Serial Attached SCSI 48300
is an eight-port
controller featuring Adaptec HostRAID™- an integrated RAID technology that
maximizes system performance and uptime. The Adaptec 48300 supports up to
eight direct attached drives and up to 128 drives using expander technology.
The card offers RAID levels 0, 1, 10 and JBOD as well as 48-bit LBA support
for the use of disk drives exceeding 137GB in capacity.
Part Number: 2216400-R |
|
|
Eight ports support up to eight devices
|
|
|
Supports both Serial Attached SCSI and
Serial ATA hard disk drives |
|
|
PCI-X 64 bit/133 MHz host interface
|
|
|
RAID 0, 1, 10 and JBOD |
|
|
48-bit LBA support |
|
|
Low-profile form factor |
|
|
Bootable array support |
|
|
RoHS compliant |
|
|
Adaptec Serial Attached SCSI 44300
is a four-port controller
with one x 4 internal SFF-8484 connector featuring Adaptec HostRAID - an
integrated RAID technology that maximizes system performance and uptime. The
Adaptec 44300 supports up to four direct attached drives and up to 128
devices using expander technology. The card offers RAID levels 0, 1, 10 and
JBOD as well as 48-bit LBA support for the use of disk drives exceeding
137GB in capacity.
Part Number: 2220300-R |
|
|
Four 3 Gbs SAS ports |
|
|
Supports both Serial Attached SCSI and
Serial ATA hard disk drives |
|
|
PCI-X 64 bit/133 MHz host interface
|
|
|
RAID 0, 1, 10 and JBOD |
|
|
48-bit LBA support |
|
|
Low-profile form factor |
|
|
Bootable array support |
|
|
RoHS compliant |
|
|
Adaptec Serial ATA RAID 2410SA
is a 4-port native Serial
ATA I/O processor-based RAID controller that supports Adaptec's advanced
feature set, including Optimized Disk Utilization. It
supports RAID levels 0, 1,
5, 10, and JBOD configurations and features 64 MB of fixed ECC SDRAM cache
memory.
Part Number: 1961900-R |
|
|
Four Serial ATA drive ports |
|
|
Intel 80302 66 MHz Intelligent I/O
processor |
|
|
RAID 0, 1, 10, 5 and JBOD |
|
|
Optimized Disk Utilization |
|
|
Online Capacity Expansion |
|
|
RAID Level Migration |
|
|
48-bit LBA supports large drives |
|
|
Adaptec Serial ATA II RAID 1420SA
is a four-port controller
featuring Adaptec HostRAID™ - an integrated RAID technology that maximizes
system performance and uptime. The Adaptec 1420SA supports up to four 3Gb/s
Serial ATA drives, Native Command Queuing, and offers RAID levels 0, 1, 10,
and JBOD (individual drive). The Adaptec 48-bit LBA support enables use of
disk drives exceeding 137 GB in capacity.
Part Number: 2170200-R |
|
|
4 Serial ATA 3Gb/s Ports for support of
up to 4 SATA disk drives |
|
|
PCI-X/133MHz host interface (supports
PCI 32/64bit as well) |
|
|
RAID 0, 1, 10, and JBOD |
|
|
Native Command Queuing |
|
|
48-bit LBA support for drives above
137GB |
|
|
Low-profile form factor |
|
|
Bootable array support |
|
|
Background initialization |
|
|
RoHS compliant |
|
|
Adaptec RAID 1220SA
is a two-port, PCI Express
x1 controller featuring Adaptec HostRAID - an integrated RAID technology
that maximizes system performance and uptime. The Adaptec 1220SA supports up
to two 3Gb/s Serial ATA drives, Native Command Queuing, and offers RAID
levels 0, 1, and JBOD (individual drive). The Adaptec 48-bit LBA support
enables use of disk drives exceeding 137 GB in capacity.
Part Number: 2232100-R |
|
|
2 Serial ATA 3Gb/s Ports for support of
up to 2 SATA disk drives |
|
|
PCI Express x1 host interface
|
|
|
RAID 0, 1, and JBOD |
|
|
Native Command Queuing |
|
|
48-bit LBA support for drives above
137GB |
|
|
Low-profile form factor |
|
|
SATA tape support |
|
|
Bootable array support |
|
|
RoHS compliant |
|
|
Adaptec RAID 1430SA
is a four-port controller featuring Adaptec
HostRAID™ - an integrated RAID technology that maximizes system performance
and uptime. The Adaptec 1430SA supports up to four 3Gb/s Serial ATA drives,
Native Command Queuing, and offers RAID levels 0, 1, 10, and JBOD
(individual drive). The Adaptec 48-bit LBA support enables use of disk
drives exceeding 137 GB in capacity.
Part Number:
2240900-R |
|
|
4 Serial ATA 3Gb/s Ports for support of
up to 4 SATA disk drives |
|
|
PCI Express x4 host interface
|
|
|
RAID 0, 1, 10, and JBOD |
|
|
Native Command Queuing |
|
|
48-bit LBA support for drives above
137GB |
|
|
Low-profile form factor |
|
|
Bootable array support |
|
|
RoHS compliant |
|
|
Adaptec Serial ATA RAID 1210SA
supports up to two Serial
ATA drives and offers RAID levels 0, 1, and JBOD. The controller supports
bootable arrays, provides background initialization and features 48-bit LBA
that allows for the use of drive sizes exceeding 137 GByte.
Part Number: 2015000-R |
|
|
2-port native Serial ATA RAID controller
|
|
|
RAID 0, 1 and JBOD |
|
|
48-bit LBA supports drive sizes larger
than 137GB |
|
|
Low-profile form design |
|
|
Bootable array support |
|
|
32-bit/66MHz PCI |
|
|
RoHS compliant |
|
|
Compare 58300, 48300, 44300, 2410SA, 1420SA, 1220SA, 1430SA Controllers
|
-
Find all the storage hardware and
software you'll ever need to custom build your own backup
and disaster recovery solutions.
-
|
|
|
|
|
|
|
